Table of Contents
Advertisement
APPENDIX H: Sun Target Servers
APPENDIX H: Sun Target Servers
TeleReach supports Sun Target Servers with the use of appropriate adapters. Contact your Raritan
representative to determine the appropriate part number.
Display Settings
1. Sun Target Servers must be configured to one of the supported display resolutions. See Figure 18
for a complete list. The most popular supported resolutions for Sun machines are:
1024x768@60Hz
o
1024x768@70Hz
o
1024x768@75Hz
o
1024x768@85Hz
o
1152x900@66Hz
o
1152x900@76Hz
o
1280x1024@60Hz
o
2. Sun Target Servers must output VGA video (H-and-V sync, not composite sync), or alternatively, an
appropriate adapter must be used.
To change your Sun video card output from composite sync to VGA output, first issue the
Stop+A command to drop to bootprom mode. Then, issue the command,
setenv ouput-device screen:r1024x768x70
to change the output resolution. Issue the "boot" command to reboot the server.
Alternatively, you may contact your Raritan representative to purchase a video output adapter. 13W3
Suns with composite sync output require APSSUN II Raritan guardian for use with TeleReach. HD15
Suns with composite sync output require 1396C Raritan converter to convert from HD15 to 13W3 and
an APSSUN II Raritan guardian converter to support composite sync. HD15 Suns with separate sync
output require an APKMSUN Raritan guardian for use with TeleReach.
Note that other KVM switch brands may or may not properly handle PS/2-to-Sun signals. Only Raritan
KVM switches are certified for use with TeleReach/Sun configurations.
87
Advertisement
Table of Contents
