Remote Connection To Telereach; Establishing A Remote Connection - Raritan TeleReach TR361 User Manual

24

5. REMOTE CONNECTION TO TELEREACH

TeleReach must be powered ON for a successful remote connection. A user can be logged on at the
TeleReach Admin Console, but this is not a requirement.
Steps that must be performed prior to establishing a remote connection:
1. Install and configure TeleReach unit - See 2. Installation and 3. Setup.
2. Fine-tune connected KVM configuration and Target Servers for optimal TeleReach
performance – See KVM Configuration Fine-Tuning in 3. Setup.
3. (Optional) Install TRC software on Remote PC – See Install TeleReach Control
(TRC) Software on Remote PC in 4. Prepare A Remote Connection.
4. Configure a remote connection – See Configure A Connection in 4. Prepare A
Remote Connection.

Establishing A Remote Connection

1. TRC: Double-click TeleReach Icon (Figure 25) found on Remote PC desktop.
Web Browser: Open Internet Explorer and in the "Address" text box, and type in
the IP address that you assigned to your TeleReach unit.
2. The TeleReach window or TeleReach web client (Figure 26) will appear.
3. Click the Connect button (Figure 27).
4. The Connect window (Figure 28) appears, listing all created connection profiles.
Figure 26. TeleReach Web Client loading in Internet Explorer
Remote Connection To TeleReach
Figure 25.
TeleReach Icon