APPENDIX J: Macintosh Target Servers
89
APPENDIX J: Macintosh Target Servers
TeleReach supports Macintosh Target Servers with the use of appropriate adapters. Contact your
Raritan representative to determine the appropriate part number.
Macintosh Target Servers must be configured to one of the supported display resolutions. See
Figure 18 for a complete list.
While using TeleReach to control and access your Macintosh server, you must set the TeleReach
control software to "Single Cursor Mode" (See Chapter 6 – Remote Operation for more details).
Dual Cursor Mode is not supported; the two mouse pointers will not appear in sync if attempting to
control a Macintosh server while in Dual Cursor Mode.