Browse For A Connection - Raritan TeleReach TR361 User Manual

26
8. Video Path. Use the pull down menu to select the Video Path to which you wish to
connect.
NOTE: For TR361 models there is only one path, so there will be no choice of Video Path on
the Login Window. For TR362, TR363, or TR464 models with a set Path Configuration of 1 path
(see 48a and 49a), the Video Path drop down selection will not appear on the Login
WindowInstead, since all paths lead to the same KVM configuration, TeleReach will
automatically connect to the next open path.
9. Select <Remember nothing> to keep user name and password from automatically
appearing on next login, select <Remember user name> to automatically supply this user
name on next login, or select <Remember user name and password> to automatically
supply this user name and its password on next login.
10. Click <OK>.
11. TeleReach will AutoSense the video of the image it is currently receiving from the KVM switch
or connected server.
12. After a few seconds the TeleReach window will appear, showing a view of the video
image currently being received by TeleReach from the connected server or KVM switch.
This can be the KVM's On-Screen User Interface (OSUI) Log in menu, or a view of the
currently selected Target Server (Figure 30).
13. You are now directly connected to the connected server or KVM switch.

Browse For A Connection

Follow the steps below to see a listing of all TeleReach units currently connected to the same network or
same analog telephone line as the Remote PC.
NOTE: Browse will only return TeleReach units using the default TCP port number 5000
NOTE: The default port must be open for Browse, which utilizes UDP, to function.
NOTE: The Browse connection method is the only method of connection available when DHCP IP
addressing is being used.
1. In the TeleReach window (Figure 26), click the Browse button (Figure 31) on the toolbar.
2. The Browse window (Figure 32) will open.
Figure 31. Browse Button
3. Click the TeleReach that you wish to connect to, highlighting the selection, and then click the
<Connect> button.
Remote Connection To TeleReach
Figure 32. Browse Window