40
8. LOCAL ADMINISTRATIVE FUNCTIONS
Initial Administrative Setup Procedure
If you did not perform the configuration steps documented in 3. Setup, first follow the following
directions to initialize your TeleReach system with basic settings:
1. Power ON TeleReach via power switch on back of TeleReach unit.
2. The Main Menu (Figure 44) will appear on the TeleReach Admin Console.
3. Use the keys <Tab>, <↑>, <↓> or <C> to highlight the Configure TeleReach selection,
then press <Enter>.
4. The Configuration Menu (Figure 45) will appear.
Figure 44. Main Menu
Local Administrative Functions