Table of Contents
Advertisement
84
TERMINATE-CAUSE
RADIUS Access Challenge
A RADIUS server can require additional information from the user, besides user name and password.
The type of information will depend on the authentication method used by the RADIUS server. After
TeleReach sends the initial ACCESS-REQUEST packet, the RADIUS server can return an ACCESS-
CHALLENGE packet. The ACCESS-CHALLENGE packet will contain one or more reply messages for
the user. TeleReach will display the reply messages and ask for the user's answer to the RADIUS
server's challenge.
In the remote application, the RADIUS Challenge dialog box (Figure 81) will be displayed after the
normal login dialog box. Enter your answer and press the OK button.
Figure 81. Example of a possible RADIUS Challenge Viewed From The Remote PC
RADIUS challenges can also be encountered at the TeleReach Admin Console (Figure 82).
Figure 82. Example of a possible RADIUS Challenge Viewed From The TeleReach Admin Console
If this is a STOP request, the reason the user was terminated. Either
USER_REQUEST (1), LOST_SERVICE (3), SESSION_TIMEOUT (5), or
ADMIN_RESET (6).
APPENDIX F: The RADIUS Server
Advertisement
Table of Contents
