Table of Contents
Advertisement
32
Switching Between Target Servers
Once TeleReach has been configured to match the base KVM switch's hotkey, switching between Target
Servers can be performed with TeleReach toolbar buttons (Figure 38).
To Invoke The OSUI:
Click the Enter On-Screen Menu button (Figure 38). The On-Screen User Interface (OSUI) of the
connected KVM switch will appear (Figure 39).
To Exit The OSUI:
Click the Exit On-Screen Menu button (Figure 38), or press the <ESC> key.
Figure 38. TeleReach Toolbar Switching Buttons
Figure 39.
On-Screen User Interface (OSUI) of Switch
Fine-Tune TeleReach Control Software
Advertisement
Table of Contents
