Fine-Tune TeleReach Control Software
6. REMOTE OPERATION
When a remote connection to TeleReach is established – See 5. Remote Connection To TeleReach -,
a view of the video image that TeleReach is currently capturing will be seen through the TeleReach
window on the Remote PC desktop. This can be a Target Server desktop (Figure 36), or a KVM On-
Screen User Interface (OSUI) menu.
Figure 36. Viewing a Target Server Desktop with TeleReach from a Remote PC
TeleReach Window
TeleReach Toolbar
TeleReach and
Target Server
Mouse Pointers
Target Server
Desktop
Window created by the TRC software. During a remote connection this window
displays the video data currently being captured by TeleReach. In the figure
above, TeleReach is capturing the image of a Target Server desktop.
Buttons representing the most commonly used TeleReach functions.
The TeleReach Mouse Pointer is a mouse pointer created by the TRC
software. Inside the TeleReach window, it leads the Target Server Mouse
Pointer. Outside the TeleReach window, it accesses the TeleReach window's
toolbar icons and pull-down menus. The Target Server Mouse Pointer, which
follows the TeleReach Mouse Pointer, is the mouse pointer that controls the
Target Server.
The desktop or monitor of the Target Server currently being viewed.
29