Table of Contents
Advertisement
Prepare A Remote Connection
4. PREPARE A REMOTE CONNECTION
Optional: Install TeleReach Control (TRC) Software
NOTE: To support TRC a Remote PC's operating system must be Windows '98, 2000, XP, or NT.
NOTE: This step is optional. TeleReach can be accessed from a Remote PC either via the
TeleReach Control Software, or via Internet Explorer (v4.0+). Accessing TeleReach via web browser
does not require any software installation on the Remote PC.
1. Insert TeleReach Control (TRC) CD-ROM into CD-ROM drive of Remote PC.
2. The TRC setup program will run automatically. If the setup program does not appear, right-
click on your Remote PC's CD-ROM drive in Windows Explorer and select Auto Play.
3. Follow the on-screen instructions given by the InstallShield Wizard to complete TRC
installation on your Remote PC. Under "Select Components," you must select either the US
version for a US Remote PC keyboard, or the Japanese version for a Japanese Remote PC
keyboard.
4. NOTE: The Japanese version of TRC enables a Japanese keyboard at the Remote PC and
also requires a Japanese keyboard to be set at the Target PC. The interface information
remains in English.
5. Depending upon the configuration of the Remote PC, the TRC setup program may also
automatically install Direct X and Microsoft Foundation Class libraries if required.
6. If Direct X or Microsoft Foundation Class libraries where installed, then you will be directed to
restart the Remote PC. Otherwise restart of the Remote PC is not required.
7. A TeleReach Icon will be added to the Remote PC desktop (Figure 19).
8. Follow the steps below to Configure A Connection.
Configure A Connection
1. TRC: Double-click TeleReach Icon (Figure 19) found on Remote PC desktop.
Web Browser: Open Internet Explorer and in the "Address" text box, type in
the IP address that you assigned to your TeleReach unit.
Figure 19. TeleReach Icon
17
Advertisement
Table of Contents
