Safety Guidelines To avoid potentially fatal shock hazard and possible damage to Raritan equipment: • Do not use a 2-wire power cord in any product configuration. • Test AC outlets at your computer and monitor for proper polarity and grounding. •...
Power ... 7 Cables ... 8 Accessories... 8 Important Information for CompuSwitch Installation... 8 Appendix B: Troubleshooting ... 9 Appendix C: Cable Support Bracket Kits ... 11 RCS24 to CS-PENT 2/CS-PENT 4 ... 11 RCS8 to CS-PENT 8 ... 12 Contents...
Page 6
Figure 8 Front panel of CS-PENT 2 Unit... 5 Figure 9 Front Panel of CS-PENT 4 Unit ... 5 Figure 10 Exploded View of Scan Rates from the CS-PENT 4 Front Panel ... 5 Figure 11 Front Panel of CS-PENT 8 Unit ... 5 Figure 12.
This prevents keyboard and mouse lockups and ensures flawless bootup and operation of any mix of computers running any operating system. Product Photos Figure 1 CS-PENT 2 Unit Figure 2 CS-PENT 4 Unit Figure 3 CS-PENT 8 Unit...
SCAN function to automatically cycle through all channels at a selectable scan rate from 1 to 16 seconds by using push buttons on the front panel • SKIP function to automatically bypass channels without a powered computer connected • Easy-to-manage, tangle-proof, high-resolution PC cables Package Contents (1) CompuSwitch-PENT unit CS-PENT U UIDE...
1. Plug the monitor, keyboard, and PS/2 mouse into the ports marked VGA MONITOR, PS/2 or AT KEYBOARD, and PS/2 MOUSE on the CompuSwitch-PENT rear panel. Figure 4 Rear Panel of CS-PENT 2 Unit Figure 5 Rear Panel of CS-PENT 4 Unit Figure 6 Rear Panel of CS-PENT 8 Unit 2.
4. Power ON the connected computer. On the CS-PENT front panel, the light above the [SKIP] button will be ON, and the light above the connected channel button number will also be ON, indicating that CS-PENT is powered ON. Note: CS-PENT is automatically powered ON as soon as at least one connected computer is manually powered ON.
Chapter 3: Operation Overview You can operate CS-PENT using the buttons on its front panel. The lights on the front panel of the unit indicate the status of operation. Note: Numbered channel buttons have two functions.When the Scan light is OFF, the buttons are used to select channels.
To restrict scanning to display only active channels, that is, channels connected to computers powered ON: 1. Press the [SKIP] button (toggle on/off). 2. The light above the button will be ON, and only active channels will be selected. CS-PENT U UIDE...
A: S PPENDIX PECIFICATIONS Appendix A: Specifications Desktop Models CS-PENT 2 2-Channel Model 10.55”(W) x 7.87”(D) x 1.75”(H) 268mm(W) x 200mm(D) x 44mm(H) 3.6 lbs. (1.62kg) CS-PENT 4 4-Channel Model 10.55”(W) x 7.87”(D) x 1.75”(H) 268mm(W) x 200mm(D) x 44mm(H) 3.6 lbs.
DB25(M) to HD15(M), 2 x mini-DIN6(M) DB25(M) to HD15(M), 2 x mini-DIN6(M) DB25(M) to HD15(M), 2 x mini-DIN6(M) ONNECTORS DB25(M) to HD15(M), DIN5(M), DB9(F) DB25(M) to HD15(M), DIN5(M), DB9(F) DB25(M) to HD15(M), DIN5(M), DB9(F) DB25(M) to HD15(M), DIN5(M), DB9(F) CS-PENT U UIDE...
B: T PPENDIX ROUBLESHOOTING Appendix B: Troubleshooting YMPTOM ROBABLE No front panel lights Bad connection. Computer not powered ON Notebook computer or Guardian device Channel light flashes Computer not powered ON continuously for that channel No video display for Loose video connection(s) one or all computers Monitor problems Keyboard error on one...
Need help?
Do you have a question about the CS-PENT and is the answer not in the manual?
Questions and answers