4.2
P
OWER
This section describes the shutdown procedures for the UPS if you want to shut it down for a
period of time during which the load devices will not be operating.
Begin the process from the UPS ON, NORMAL MODE screen.
1.
It is advisable to turn of all equipment connected to the P
2.
Press the ON/OFF button twice.
The ALARM LED lights up for a few seconds,
then the screen reads "UPS OFF, NO OUTPUT".
24
Gamatronic Electronic Industries Ltd.
+ SA25 shutdown
Figure 22: UPS ON, normal mode
Figure 23: UPS OFF, no output
The
shutdown is now complete.
P
+ SA
OWER
+ SA.
OWER
User Guide: MEGA V2 SA25, Release 1.5