Statistics; Statistics; Interfaces; Nterfaces - Cal Amp Dataradio HiPR-900 User Manual

6.7.5 Statistics

6.7.5.1

Interfaces

The LAN (Ethernet) Interface layer shows reception and transmission traffic counts.
The RF Interfaces indicates the result of the RF link performance.
Note: All definitions given below use the following convention:
RX (or Input) = data received from a lower network layer
TX (or Output) = data transmitted to a lower network layer
Item
LAN – RX Pkts
LAN – TX Pkts
RF OIP sublayer – RX Pkts
RF OIP sublayer – TX Pkts
RF Airlink sublayer – RX Pkts
RF Airlink sublayer – TX Pkts
Note: For Transport (TCP/UDP) and Network (IP) interface layers statistics refer to MIB 1213.
See Section 6.7.3.3.1.2 for details.
001-5099-000
Figure 73 - Statistics –Interfaces
The total number of packets received by Ethernet interface.
The total number of packets transmitted by Ethernet interface.
The total number of input packets received by RF-OIP interface.
The total number of output packets transmitted by RF-OIP interface.
The total number of packets transmitted by the RF Airlink sublayer.
The total number of packets received by the RF Airlink sublayer.
68
Description
HiPR-900 User Manual