Selectable Data Rates - Cal Amp Dataradio HiPR-900 User Manual

sion) allows for the use of the Parallel decode technology, increasing receive capability by having a high-
er gain receive antenna separate from the rule-limited transmit antenna.
PoE allows for powering the HiPR-900 via the Ethernet port. A PoE power injector is required (DRL part
number 250-5099-001). The switch or hub allows for a local Ethernet connection by the user's PC for the
purpose of set-up, troubleshooting and diagnostics and avoids the need to disconnect Ethernet RTU or
PLC. The two serial ports of the HiPR-900 can be setup to allow connections to legacy equipment such as
serial RTUs and PLCs.
5.4

Selectable Data Rates

Switchable data rates of 256 or 512 Kbps allow optimizing installations for highest throughput or maxi-
mum range. The sophisticated DSP modem gives optimal performance in either mode, whether a short-
range LAN extension or long-range link.
Power Supply
001-5099-000
PD(RX)
Antenna
PoE
RJ-45
PWR &DATA
RJ-45
DATA
User's Ethernet
RTU or PLC #1
Figure 8 - Setup using Switch (or Hub) and PoE power injector
Switch or
Hub
14
TX/RX
Antenna
User's Serial User's Serial
RTU or PLC #1 RTU or PLC #2
HiPR-900 User Manual