6.7.3.8
Ethernet (PHY)
Item
Auto Negotiate
PHY Bitrate
Force to 100 Mbps
Force to 10 Mbps (Default)
Half Duplex (read-only field)
PHY Duplex
6.7.3.9
RF Link
Item
Disabled, Enabled (Default) –
Normally used in a point- to- point network carrying Ethernet traffic. Maximizes RF link effi-
TDD Mode
ciency for carrying two-way traffic
Note: This parameter can only be set for the Master Unit. Repeater and Remote units will
only display the Master's setting.
Enabled/Disabled (default)
Timed Preset
While TDD provides the best performance in point to point and point-to-multipoint configu-
Segments
rations, please enable "Timed Preset Segments" for networks with a repeater in order to
avoid RF collisions. . See section 6.7.3.9.1 for more
001-5099-000
Figure 66 - Advanced IP Configuration – Ethernet (PHY)
Description
Figure 67 - Advanced IP Configuration – RF Link
Description
63
HiPR-900 User Manual