Ip Network Settings In Bridge Mode ( With Repeater ) - Cal Amp Dataradio HiPR-900 User Manual

In Bridge mode, the IP settings of the RF interface are not needed. All Ethernet IP interfaces of all units
must be part of the same IP network (if access to the units is required).
HiPR -900 Master
Eth1 IP: 172.30.1.2
RF IP: unused
MASK: 255.255.255.0
RF Mask: unused
Host
IP: 172.30.1.1
MASK: 255.255.255.0
001-5099-000
HiPR -900 Repeater
RF IP: unused
RF Mask: unused
Figure 19 - IP Network Settings in Bridge Mode (with Repeater)
Eth1 IP: 172.30.1.3
MASK: 255.255.255.0
RTU
IP: 172.30.1.10
MASK: 255.255.255.0
22
HiPR -900 Remote
Eth1 IP: 172.30.1.4
RF IP: unused
MASK: 255.255.255.0
RF Mask: unused
RTU
IP: 172.30.1.11
MASK: 255.255.255.0
HiPR-900 User Manual