Rf (Ip) - Cal Amp Dataradio HiPR-900 User Manual

6.7.3.2

RF (IP)

Item
RF MAC
RF IP Address
RF Net Mask
RF MTU
Note:
Normally the parameters on this page are not changed except for RF MTU.
001-5099-000
Figure 38 - Advanced IP Configuration - RF (IP)
Unit's RF MAC address
Displays factory-assigned address: nnn.nnn.nnn.nnn "Factory"
Entering 0.0.0.0 sets the RF IP Address to the factory default and high-
lights the "Factory" name (active address)
Entering nnn.nnn.nnn.nnn (RF IP Address of your choice) overrides the
factory default and highlights the "Override" name (active address)
Set to valid common IP netmask for all units within a HiPR network
Default 1500. Range 100 to 1500 bytes. Entering a value lower than 1500
may reduce system performance.
42
Description
HiPR-900 User Manual