Nat On; Pr-900: Ethernet Interface Is Private; Ethernet Interface - Cal Amp Dataradio HiPR-900 User Manual

6.7.3.3.2.1 NAT on HiPR-900
On all HiPR-900 units, the user can select which one out of the two interfaces (Ethernet or RF) will be
considered private.
6.7.3.3.2.1.1 Ethernet Interface is Considered Private
An IP packet whose source IP address originates from the Ethernet network and is sent towards the RF
network, will have its source IP address replaced by the RF IP address of the HiPR-900 unit. In the exam-
ple below (Figure 45), the Ethernet interface of the HiPR-900 (2) unit is set as private.
An IP packet sent from the private network towards the public network would have its source IP address
replaced by the RF IP address of the HiPR-900 (2) unit.
001-5099-000
Figure 44 - NAT on HiPR-900: Ethernet interface is private
Figure 45 - NAT Enabled on Ethernet Interface
48 HiPR-900 User Manual