Basic And Advanced Parameter Settings; Unit Status - Cal Amp Dataradio HiPR-900 User Manual

6.7

Basic and Advanced Parameter Settings

6.7.1 Unit Status

6.7.1.1 Unit Status
Item
Banner
Variant
Station Name
System ID
Local Time
Operating mode
IP Forwarding mode
001-5099-000
Figure 29 - Unit Status
Displays HiPR-900 software revision information retrieved from the connected unit.
Have this information handy if contacting Dataradio support.
The Banner fields are deciphered as following:
HiPR-900:
FHSS (Frequency Hopping
Spread Spectrum):
900
PROD
V2.8
R190
Displays Product Variant when different from full-featured HiPR-900 version:
Standard for HiPR-900S
Displays name of the connected unit.
Configured under Setup Basic
Displays System's unique identification number
Configured under Setup Basic
Displays time of configured time zone computed using UTC time and configured Time
Zone (If SNTP is enabled)
Displays operating mode (Remote Master or Repeater)
Configured under Setup Basic
Displays IP forwarding mode (Bridge or Router)
Configured under Setup Basic
Description
Product name
Protocol Name
Band(s) of operation
Production build
Vx.y Major.minor version number
Rxx Sequential Package Release Build
Number
General Station Name
General System ID
General Operating Mode
General IP Forwarding Mode
28 HiPR-900 User Manual