Five (Bridge Mode) - Cal Amp Dataradio HiPR-900 User Manual

6. On step five of the Setup Wizard, read the on-screen
instructions (Figure 27).
Click one of the "Save Config" buttons. Wait for the
Progress bar activity to stop.
The status reports "Success". Click on "Reset Unit"
button. Wait for the Progress bar activity to stop. A
"Station Reset" 20-second timer counts down while
the status reports "Working...".When done, the sta-
tus reports "Ready".
Note: The Setup Wizard configurations are for
Bridge mode only. If in router mode, click the
"Switch to Bridge mode" button and follow the in-
structions below (Figure 28).
Figure 27 - Setup Wizard - Step Five (Bridge Mode)
Fig-
ure 28 - Setup Wizard –Step Five (Switch to Bridge mode)
001-5099-000 27 HiPR-900 User Manual