Unit - Cal Amp Dataradio HiPR-900 User Manual

The following setup example would allow the "Sender" unit to communicate with different multicast
groups. The settings shown in Figure 61 below, and Figure 62, would enable the Sender unit to reach all
entities of the various groups. Figure 61 illustrates setup on the Master unit.
Multicast (Enabled/Disabled)
Outbound unit address
Multicast Address List
Remote 1
Remote Host Remote Host
001-5099-000
Figure 61 - Multicast Window Details (On the Main HiPR-900 unit)
Enables or disables the registration of the multicast groups by the main HiPR-900

unit.

Indicates the "All Remote HiPR-900 unit" multicast group
Indicates the various "Remote Host" groups
"All Remote HiPR-
Remote 2
(224.168.201.1)
"Remote Host" group 1
(224.168.200.1)
Figure 62 - Registration to multicast group
Sender
Network
Master HiPR-900 unit
RF Airlinks
900" group
Remote 3
Remote Host
60
Remote 4
Remote 5
Remote Host Remote Host
"Remote Host" group 2
(224.168.200.2)
HiPR-900 User Manual