Basic Ip Configuration - Cal Amp Dataradio HiPR-900 User Manual

6.7.2.2

Basic IP Configuration

Item
Enables the top three IP dialog boxes and disables the lower three. You may need to ask
your network administrator for the appropriate IP settings.
Use fixed IP settings
See section 6.3 for further details.
To activate, select the "DHCP Client" radio button, click on the "Apply" button, click on
the "Save Config" button and reboot the Host PC. On restart, the top three dialog boxes
are disabled and the lower three read-only IP dialog boxes are populated with the IP set-
tings automatically assigned (if your network supports the DHCP Server capability).
Use DHCP Client
NOTE: Activating this option will reset the unit's IP address. If your network supports the
DHCP Server capability, make sure the IP address assigned by the DHCP server will be
accessible to you. If your network does not support DHCP server capability, the unit will
be reset to a default (192.168.204.1) IP address within the first 5 minutes.
IP Address In "Use fixed IP settings" window, set to valid unique IP address for each individual unit
In "Use fixed IP settings" window, set to valid IP netmask for each individual unit (may be
Netmask
same or different depending on customer's IP network topology).
In "Use fixed IP settings" window, set to valid Default Gateway.
Default Gateway
May change for different groups or locations.
001-5099-000
Figure 32 - Setup (Basic) – Basic IP Configuration
Description
32 HiPR-900 User Manual