Cal Amp Dataradio HiPR-900 User Manual page 67

Occasionally, the unit cannot determine that the packet is actually a directed broadcast. In such a
case, the packet is normally routed.
Directed broadcast forwarding
Directed broadcast forwarding
enabled
In the example in Figure 54, directed broadcast forwarding is enabled on the Master unit and on Re-
mote (1) unit. If Sender wants to reach Remote Host (1), Remote Host (2), and Remote Host (3)
with a single packet, he can send to destination address 172.30.1.255.
001-5099-000
enabled
10.0.0.2/8
Remote (1)
172.30.1.1/24
Remote Host(1) Remote Host(2)
172.30.1.2/24 172.30.1.3/24
Figure 54 - Example-Directed broadcast fowarding enabled
Send to 172.30.1.255
Sender
Master
10.0.0.1/8
RF Airlinks
10.0.0.4/8
172.30.3.1/24
Remote Host(3) Remote Host(4)
172.30.1.4/24
172.30.3.2/24
54
Remote (2)
HiPR-900 User Manual