Ip Services Setup - Cal Amp Dataradio HiPR-900 User Manual

Wireless radio modem
Table of Contents

Advertisement

6.7.3.3

IP Services Setup

Item
Server
Gateway
Lease Start Address
Lease Duration
Maximum number of leases
IPSD
NAT
RIPV2
001-5099-000
Figure 39 - Advanced IP Configuration – IP Services Setup
DHCP Server Disabled, Enabled (Default). The Dynamic Host Configuration Pro-
tocol provides a framework for passing configuration information
E.g.: IP address to Hosts (i.e. PC/RTU) on a TCP/IP network.
IP addresses of the gateway assigned by the DHCP server. In router mode, the
default (preset) gateway is the IP address of the unit itself. In bridge mode, the
default (preset) gateway is 0.0.0.0. To override the default setting, select the
"Override" radio button and enter a valid IP address in the text field.
Pool of addresses allocated for DHCP purpose. If a unit is configured as DHCP
Server, this field represents the start IP address pool managed by the DHCP
Server. Normally, HiPR-900 automatically calculates the Lease Start Address
(equal to Ethernet IP Address plus one)
The period over which the IP Address allocated to a DHCP client is referred to as
a "lease". Lease Duration is the amount entered in minutes
Maximum number of DHCP client(s) a unit can serve
IP Services Delivery – Disabled, Enabled(Default)
Allows or disallows the generation of locally provided IP Services such as online
diagnostics etc...
Network Address Translation - Disabled(Default), Enabled (ETH hidden by
NAT)/Enabled (RF hidden by NAT)
NAT technology is a method by which IP addresses are mapped from one ad-
dress space to another. In HiPR-900, it is normally used on the WAN side of an IP
network to hide local IP addresses from an external IP network (i.e. Internet)
On all HiPR-900 units, the user can select which one out of the two interfaces
(Ethernet or RF) will be considered private.
Router Information Protocol v2 - Disabled(Default), Enabled
RIPv2 is a dynamic IP routing protocol based on the distance vector algorithm
and is only used in Router mode.
Description
43
HiPR-900 User Manual

Advertisement

Table of Contents
loading

Table of Contents