Electrical Connection - PSG 15 Kw Installation And Operating Instructions Manual

ELECTRICAL CONNECTION

The following instructions do not supersede the local code.
CADDY-WOOD ONLY
On the wood Caddy, the fan limit control is installed with the support provided, on the left side of the appliance,
(four holes are pre-drilled on the edge of the furnace, use the two that are closer to the front of the furnace),
and connected to the electrical box along with the transformer. Install the damper motor on the right side of the
facade, above the door (use the pre-drilled holes). The chain that links the air inlet damper to the motor must have a
play of 1/8 in. When there is no call for heat, the air inlet damper must be completely closed and the chain must be
hooked to the servo-motor at the "8 o'clock" position.
WARNING: USE WIRING SUITABLE FOR 75
*
O
C
9
HOLES TO
SECURE FAN
LIMIT BRACKET
SERVOMOTOR