Table of Contents
Advertisement
CHIMNEY MAINTENANCE
The most efficient method to sweep the chimney is using a hard brush. Brush downwards so soot and creosote
residues will come off the inner surface and fall at the bottom of the chimney where they can be removed easily.
The chimney must be checked regularly and if creosote has accumulated, it must be removed without delay.
Cleaning on a monthly basis should be sufficient during the coldest months.
Smoke flue inspection
-
The smoke flue should be inspected regularly during the heating season.
-
If possible, the smoke flue should be dismantled and cleaned.
-
The flue should be inspected for possible damage.
-
If it is in good condition, put the flue back in place; otherwise, it must be replaced.
-
Use only wood as a combustible.
-
Seasoned hard wood logs 18" to 22" long are recommended as combustible.
MAINTENANCE OF THE BLOWER MOTOR
The two motor bearings must be lubricated once a year using non detergent SAE 20 oil.
FILTERS
The furnace must not be operated without filters. In order to efficiently and safely operate a slow combustion
heating system , you have to ensure a regular maintenance. This means that the chimney, the joints and the flue
must be kept in good condition and the air filters must be replaced regularly; use the same size and same type as
the original filters.
Filters dimensions
Caddy: 12" x 24" filters, part #21039
DOOR GASKET MAINTENANCE
It is important to maintain the door gasket in good condition. After a while, the gasket might sag; a door
adjustment may then be required. If the door adjustment is not sufficient, replace the door gasket.(see 6-Gasket)
DO NOT OVERLUBRICATE
15
Advertisement
Table of Contents
