Table of Contents
Advertisement
WARNING:
1. REFER TO THE RATING PLATE FOR THE PUMP PRESSURE AND THE NOZZLE TYPE.
2. REFER TO THE BECKETT INSTRUCTION MANUAL FOR DETAILS ON THE BECKETT PUMP.
3. FOR ELECTRODES SETTING SEE THE BECKETT MANUAL.
4. FOR THE START-UP AND ADJUSTMENT OF THE BURNER SEE THE INSTRUCTION MANUAL OF
THE BURNER.
5. IN CASE OF BURNER FAILURE, REFER TO THE BURNER MANUAL.
4- APPLIANCE START-UP
The start-up must be performed by a qualified technician. Make sure the installation is completed and the
oil tank has been filled up. The oil line must also have been purged.
CAUTION: CLOSE THE BLOWER COMPARTMENT ACCESS
5- PROLONGED CLOSING
A) Cut off the electric circuit
B) Close the oil shut-off valve
NOTE: The shut-off valve must be closed when the appliance is out of service for a prolonged period of
time.
6- MAINTENANCE
At the beginning of heating season, have the complete installation inspected by a qualified service man,
especially the lighting system and the controls.
NOTE: THE UNIT'S MAINTENANCE, REPAIRS AND THE CLEANING OF
THE OIL FILTER MUST BE DONE BY A QUALIFIED TECHNICIAN.
SERVICE
Before calling for service, first check the following:
-
Fuel supply
-
Electric fuses or breakers
-
Thermostat setting
-
Fan limit controls settings
-
The state of the green diagnostic LED on the burner control (see section: APPLIANCE
INSTALLATION, J- COMBUSTION SAFETY CONTROL).
PANEL BEFORE STARTING THE BURNER.
32
Advertisement
Table of Contents
