Exposure; White Balance (Wb) Setting; Daynight Setting - Honeywell 35 Series User Manual

Exposure

Meter area is used to select the exposure area. Select Whole/Center spot/Center area
for different area exposure settings.
Exposure mode: The exposure modes include:
•
Auto: The system performs auto exposure based on the monitoring environment.
•
Manual: Set Shutter Setting/Iris Setting/Gain Setting to manually adjust the
exposure level for getting the best image quality.
•
Shutter priority: you can select fixed shutter and the camera will automatically tune
the gain and iris to match an optimal exposure level. Gain range will be under Max
value.
•
IRIS priority: you can select IRIS F-number and the camera will automatically tune
the gain and exposure time to match an optimal exposure level. Gain range and
exposure time will be under Max value.
Max shutter: The device automatically adjusts the shutter time based on the ambient
light under Max value setting.
Max gain: The device automatically adjusts the gain based on the ambient light under
Max value setting.
White Balance (WB)
Mode: Adjust the value for the best color temperature.
•
Auto: Select it and the camera will automatically adjust the color temperature.
•
Tungsten/ Fluorescent/ Daylight/Shadow: Select it and the camera will change to
Tungsten/ Fluorescent/ Daylight/Shadow color temperature.
For PTZ models, Tungsten/Daylight color temperature is supported.
Note:
•
Manual: You may manually tune the color temperature by dragging the R Gain and
B Gain slider.

DayNight Setting

The day night mode settings vary based on device models.
D/N setting: It can be set to Auto, Day mode, Night mode or Timing.
•
Auto
The camera automatically removes the filter by judging the level of ambient light.
Camera will turn on IR LED in night mode if you select IR LED under Light mode.
Note:
•
Day mode
In day mode, the camera switches on the IR cut filter at all times to block infrared light
from reaching the sensor so that the colors will not be distorted.
•
Night mode
Honeywell 35 Series IP Cameras User Guide
Setting
23