3.5 Network
3.5 Network
3.5.1 Network
3.5.1 Network
Enter network details and configure network settings such as the bandwidth, port number and user
connection number.
1
2
3
4
5
6
7
8
IP Auto Allocation (DHCP) : Check the IP Auto Allocation box to receive the address automatically
1
from the DHCP server if the DVR is connected to a DHCP network. If connected to a LAN network
without a DHCP server, then manually enter the network details for the connected network, input IP
address, subnet mask and gateway.
2
Auto DNS Server setting : Input first DNS server address to main DNS server and support DNS server.
☞
☞
[Note]
• Please contact the network administrator if you don't know the IP address or
network situation.
3
Bandwidth : Set up the maximum bandwidth for the DVR data transmission by network.
4
Number of Remote Users : Set up the acceptable number of connected clients (remote users).
☞
☞
[Note]
• When many clients connect to the DVR, the system can interfere with basic
operation due to a large load on system resources. The count function is made
to prevent the system from being overloaded by too many users. If this
happens, limit the client connect number.
5
WEB DVR Support : Select to enable or disable the Web DVR facility.
6
GMS Support : Select to enable or disable the GMS software connection.
7
Port number : Input the network port on which data is transferred. Click on the "Port Check" button to
find if the selected port number is available on your network.
8
Upgrade Agent Port : Input the network port number by which to upgrade DVR software. Click "Port
Check" button to check the network port is available.
66
66