Table of Contents
Advertisement
3
. Configuration
3.1 Hardware
3.1 Hardware
The hardware setup allows users to modify external device configurations, such as cameras, alarms
and monitors.
3.1.1 Camera
3.1.1 Camera
You can set up each camera configuration individually using the options available below.
1
1
Camera : Select the camera you wish to set up.
2
Camera Display : It shows the picture of the selected camera. When you make adjustments to the
camera settings, you can see the changes in the picture.
3
Information : Displays all the setup information for the selected channel.
Attribute : Set up the camera name, camera in use or disabled, apply PTZ protocol and
4
whether the covert camera is enabled or disabled, apply Masking (privacy) zone.
Adjustment : Change the settings for the brightness, hue, contrast and saturation.
5
Click on the "Default" button to return to the default settings. AGC (Auto Gain Control) is an
additional feature (automatic control function of brightness).
Apply to : The selected channel setting value can be applied to all or just selected channels.
☞
☞
[Note]
• The picture control should not be used as the main setup point. It's just for
adjustment please check the setup of the camera and monitor output first.
6
Linked Alarm-In : Select an alarm-in to be linked with the camera. When an event occurs in an
alarm-in, any camera linked to the alarm-in will record.
2
4
6
3
5
41
41
Advertisement
Table of Contents
