Ganz ZR-DHC830NP Instruction Manual page 86

3.7 AddOn
3.7 AddOn
3.7.1 Keypad
3.7.1 Keypad
Input DVR, PTZ and external monitor information for control through a Keypad device.
1
2
3
DVR ID : Select DVR ID (DVR 1~DVR 100) to be identified on Keypad.
1
2 Keypad ID : Select Keypad ID (Keypad1 ~ Keypad4) accessible to DVR.
3
Keypad Setup :Input keypad details for controlling the DVR or external monitor.
Keypad Name : Enter the name of location where the Keypad is installed.
Use :Select the enable or disable the Keypad.
Keypad Control : Select if you want to control "DVR" or "External Monitor" by Keypad.
Keypad Model : Select the Keypad protocol of the installed Keypad.
Speed : Select the Keypad speed(2400~115200 Bps).
Address : Enter the Keypad address(0~255).
Port : Select the port number connected to the Keypad.
Mode : Select the port mode connected to the Keypad.
Parity : Set bit (None, Odd Even, Space) to prevent fatal error.
Data Bit : Set data bit 4, 5, 6, 7 or 8.
Stop Bit : Set data bit 1, 1.5 or 2.
Default : Click on the "Default" button to the default settings.
86
86