Ganz ZR-DHC830NP Instruction Manual page 59

Linked Camera : Link cameras to record upon motion detection in another camera, multiple cameras
9
can be selected to be linked via motion.
Linked Alarm-Out : Link alarm-outs to trigger on motion detected in a camera, multiple alarms can be
10
linked via motion
Time Zone Setting
Time Zone Setting
1
2
6
Schedule Mode : Select the schedule Mode (Weekday, Saturday, Holiday)
1
Weekday : Setup timeline for the weekday schedule
Saturday : Setup timeline for the Saturday schedule
Holiday : Setup timeline for the Holiday schedule
Area : Select the area mode, there are 5 area modes for each schedule mode
2
Area1 ~ Area4 : Select a preset area mode to add
All : The Area All option is the default mode on the timeline when no other area (1-4) are used.
3 Time Zone : For selected area input the time period for operation.
Clear : For the select the Area(Area1~4) the "Clear" button removes the area setup from the
4
timeline.
Set : Once the area and time zone are selected click the "Set" button to apply the setting, the setting
5
will then be shown on the timeline.
Timeline : Displays the timeline for the selected schedule mode.
6
[Note]
•Each area mode cannot be selected twice on the same schedule also area
modes cannot overlap each other.
3
4
5
59
59