Ganz ZR-DHC830NP Instruction Manual page 21

6 Camera button : Indicates which camera is connected to the DVR. Drag the camera button and
drop it to at the desired location, then that camera picture will be shown on
the selected display area.
Alarm-In : It indicates which sensors are connected to the DVR system.
7
Time Display : Shows the GANZ logo and the current time and date.
8
System condition Window : Displays the HDD capacity % used and a light to indicate
9
10
Event window : It displays each event which occurs on the system.
Login : Click this button to access the DVR menus. Click to login and click again to logout.
11
12 Search button : Click to enter the search menu.
13 Configuration button : Click to enter the setup menu.
14 1Ch Playback button : Play one channel backwards instantly (the time gap of the instant playback
can be set in chapter 3.6.2 Setup – 1Ch Playback Time ).
15 Instant Backup : Backup a camera instantly (set back up time in chapter 3.6.2 Setup – Instant
Backup Time).
the USB/overwrite/network status.
8
9
10
11
12
13
14
15
6
7
21
21