Table of Contents
Advertisement
2.12 Pan/tilt mode
2.12 Pan/tilt mode
The pan/tilt controls are not displayed on the live display screen until a camera set up for pan/tilt control has
been selected for full screen. The controls are then displayed on the right-hand side of the screen as seen
below.
1
Direction button : 8-way control for PTZ direction.
2
Focus/Zoom/Iris : Controls the PTZ focus, zoom and iris.
3 Auto Pan : Automatically observes along two previously defined points.
"Auto Pan" : Click on the button to enable AutoPan and click again to disable.
"Start" : Button to set up the PTZ start position.
"End" : Button to set up the PTZ end position.
4 Setting : Click "Setting" button to setup to Auto Focus and Iris Mode. Also PTZ movement can be
☞
☞
[Note]
•Controlling on Auto Focus or Auto Iris can change to passive mode.
5 Set Tour : Click "Set Tour" button to setup a PTZ camera to move between preset positions in a
set between 10 different speed levels.
selected order and time interval.
3
36
36
1
2
4
5
6
7
8
Advertisement
Table of Contents
