Ganz ZR-DHC830NP Instruction Manual page 61

3.3.3 Video loss
3.3.3 Video loss
Video loss setup is used for when the video signal is lost either through camera malfunction, cable
disconnection, damage or other external tampering. When video loss occurs, it can be used to make
another camera record or trigger an alarm and PTZ preset movement.
1
1
Camera : Select the channel to set up the camera.
2
Enable : Trigger the DVR internal speaker to beep when video loss occurs.
3
Camera : Indicate the name of the selected camera.
4 Linked camera : Set up other cameras to be linked to the selected camera upon video loss.
Linked PTZ : Link a PTZ camera to the camera. Upon video loss, the PTZ camera will move to a
5
selected preset position.
Linked alarm : Link alarm outputs to be connect to the selected camera. Upon video loss, the alarm-out
6
will be activated.
2
3
4
5
6
61
61