Ganz ZR-DHC830NP Instruction Manual page 47

In camera watch part, when user wish to hide some special part because of privacy matter,
User can set up Privacy zone.
Masking (privacy) zone setup
Masking (privacy) zone setup
1. Select a camera number for Privacy Zone you wish to set up.
2. Select "Use" in the Masking Zone menu.
3. Click "Setting" button, then Grid pattern will be displayed on camera Display.
4. Select a part wished to hide by mouse on camera.
Assigning of Privacy Zone : Click left button on mouse and Drag.
Removing of Privacy Zone : Click right button on mouse and Drag.
5. Press "OK" button, then Privacy Zone will applied on watch screen
☞ ☞ [Note]
• On recording, the special pare set as Privacy Zone will be not recorded.
47
47