Table of Contents
Advertisement
3.3 Event
3.3 Event
3.3.1 Motion detection
3.3.1 Motion detection
Record images and generate alarms using individually assigned cameras for motion detection.
Determine motion block areas, sensitivity and pre/post recording times.
1
Camera : Select the camera you wish to set up.
1
Motion detection grid : Displays the picture for the selected camera. Use the mouse to select and
2
deselect blocks within the area to be used for motion detection. The green color means the area is
active and a blank block indicates that it is deactivated.
Motion detection area setup : Click the left mouse button and drag or select areas for motion
detection area designation.
Motion detection area removal : Click the right mouse button and drag or deselect areas to remove
from the motion detection area.
3
Detection mode : Select between motion detection and object detection modes. If you want to use the
motion detection type, select "motion detection". If you want to use object detection type, select "object
detection".
Motion detection : This type of recording records motion in the designated areas whenever motion
occurs.
Object detection : This type of recording records the movement of objects in the designated areas
when objects are moved.
4
Motion setting : Input the setup for the motion Detection facility. Use the block count, sensitivity and
grid to select how the motion detection will work.
Schedule Mode : Select either weekday, saturday or holiday to set the motion setting, there are 5 area
setup's for each schedule mode.
Area : Set the area. First select area number then use the gird, block and sensitivity to adjust the motion
options. Click the set button to apply the settings, the Area All is the default setting if no area setups are
used.
2
3
4
57
57
Advertisement
Table of Contents
