Ganz ZR-DHC830NP Instruction Manual page 7

Power setup
Connect with AC115V if the
AC selector appears as shown
here.
Do not install the system in an area featuring high
magnetic, electric wave or wireless devices such
as radio or TV.
• Install the system in a place without magnetic
objects, electric frequencies or vibration.
Prevent any substances from entering into the
system.
• This may cause system malfunction.
Install the system in a place with sufficient air
ventilation.
• Keep at least 15cm distance between the back
of the system and the wall, and at least 5cm
distance between the side of the system and any
walls.
Warning
Connect with AC230V if the
AC selector appears as
shown here.
Caution
Install the system in a place with appropriate
moisture and temperature levels.
• Avoid installing the system at high (over 40℃)
or low (under 0℃) temperatures.
Do not place any heavy objects on the system.
• This may cause system malfunction.
Install the system on a stable and level surface.
• The system may not operate properly.