1.7 Network connection
1.7 Network connection
Switch hub (100Mbps)
The DVR system support includes the remote control, remote search and remote S/W
upgrade by network. When setting up the network, it is recommended to use the switch hub
with TCP/IP protocol for LAN/WAN.
Network cable connection method
1. Connect the UTP cable with the network port of the system back panel.
2. Connect another UTP cable line with the switch hub.
☞
☞
[Note]
• Please contact your ISP when you connect the DVR system to the network to prevent
network problems.
• Please use the CAT5 cable, which consists of the RJ-45 jack and switch hub (100Mbps), for
the TCP/IP connection.
UTP Cable (CAT5)
Router
LAN/WAN
internet
19
19