Rena MACH 5 Operator's Manual page 55

14. From the "Mail Print Setup" window; Click on
the "Advanced Settings" button.
The "M Series Printer Driver Properties"
window will open.
Under Media Size select "Env. Com10 4 1/8 x
9 ½ in".
Under Orientation select Landscape
Select your other desired choices
Print quality (12 IPS Normal or 6 IPS Best).
IPS = Inches per second.
Copies, etc.
Then Click on OK to close this window.
15. In the "Mail Print Setup" window select "all
pages" or the range of addresses you want to
send to the printer.
16. When ready to print, make sure the printer is
ready (ON/OFF button is illuminated), then
click on the "Print" button.
Note: The Intelligent Mail Barcode (IMB) will
not be displayed or printed unless you have
"cleaned up" the mailing list using the Address
Quality, Address Correction (CASS) feature in
Bulk Mailer. Your Bulk Mailer subscription
must be current for this feature to work.
Please contact Satori Software (800-357-3020) or visit their web site for additional information.
http://www.satorisoftware.com
SECTION 3
OPERATING THE PRINTER
51