Rena MACH 5 Operator's Manual page 51

13. Add any additional items that you
want printed to the "designer" screen.
Drag and drop the items onto the
layout, wherever you want them to
be printed on the envelope.
Click on Save.
14. Click on the "Go to Preview Mode" icon
"designer" screen. The envelope preview will be displayed.
Note: The Intelligent Mail Barcode
(IMB) will not be displayed or
printed unless you have "cleaned
up" the mailing using the Address
Quality, Address Correction
(CASS) feature in Bulk Mailer.
Your Bulk Mailer subscription must
be current for this feature to work.
Tip: If you need to change the layout; Click on the "Go to Designer Mode" icon
the "designer" screen.
15. Click on the printer icon
Make sure the "M Series Driver" is selected as your "Printer:".
16. From the "Mail Print Setup" window; Click on
the "Advanced Settings" button.
The "M Series Printer Driver Properties" window
will open.
, located at the upper left-hand corner of the
, to open the "Mail Print Setup" dialog box.
SECTION 3
OPERATING THE PRINTER
, to return to
47