Media Tab - Rena MACH 5 Operator's Manual

SECTION 3
OPERATING THE PRINTER

Media Tab

The Media tab provides the following features:
•
Position Adjustment – This feature will
allow you to make small corrections in the
horizontal and vertical position of the image.
Horizontal Offset – allow you to set a plus or
minus number.
Vertical Offset – allows you to set a plus or
minus number.
Inches – Not available
Millimeters – Not available
Pixels – value in dots (very small)
•
Top of form indicator –Please be sure
"None" is selected or the printer will not
operate properly. The other choices are not
valid for this printer model.
•
Page Cutting – Please be sure neither of
these boxes are checked off, or the printer
may not operate properly. These choices are
not valid for this printer model.
•
My Print Settings – Allows you to save or recall (select) your custom driver settings for various
jobs.
36