Rena MACH 5 Operator's Manual page 53

#10 Envelope, Feeding Short Edge First
1. Open Bulk Mailer 5.
From the "Home" tab,
select (double click)
on the "mailing" of
your choice.
2. Select the "Print
Mail" tab (left side of
screen).
3. From the "Print Mail" screen; double-click on the "Print Mail Wizard" which will guide you
through the template (layout) setup process.
4. When the Welcome screen appears click on Next.
5. The "Print Mail Template Type" window will open.
Select "Envelopes – Graphical Output".
Click on Next.
6. The "Graphical Envelopes Options" window will open.
Select the "M Series Driver" from the Printer pull-down list.
Then select "Laser or Inkjet"
Click on Next
7. The "Envelope Options" window will open.
Select "#10 Envelope" (4 1/8"H x 9 ½"W) from the list.
Click Next.
8. The "Address Block Options" window will open.
Select your Address Block option (example: Add a basic address block with barcode)
Select your Barcode Type option: POSTNET or Intelligent Mail.
Click Next.
9. The "Summary" window will open.
Under "Template Options" select "Preview labels based on settings" and "Save settings as a new
template".
Type a name (example: Mach 5 #10 Short Edge First) for your new template.
Then click on Finished.
10. The template will be displayed for
you to edit (add, remove, position
data).
Your envelope design (layout)
should look similar to the one
shown here.
SECTION 3
OPERATING THE PRINTER
49