Services Tab - Rena MACH 5 Operator's Manual

Services Tab

The Services tab provides the following features:
•
Print Configuration Page – Prints out the
current configuration of the printer including
current Firmware version, Network
Connection, printer Serial Number and more.
•
Print Demo Page – Prints color bands to check
print quality and condition the printhead.
•
Print Diagnostic Page – Shows basic printer
information, memory, Network Settings, Event
Log and RAM partitions.
•
User Maintenance -Level 2 – Runs cleaning
and wiping routine twice for better flushing and
cleaning.
•
User Maintenance -Level 3 – Runs the
cleaning routine multiple times for the most
thorough flushing and cleaning of the
printhead.
•
Wipe Printhead – wipes/cleans the printhead.
•
Printhead Release – Use this feature to prepare the printer for the installation or removal of the
Printhead Cartridge. This feature pumps some of the ink back into the Ink Tanks and then it
releases (opens) the Printhead Latch. Same as using the Printhead Latch Release Button.
See "Installing Printhead
•
System Deprime – Use this feature to prepare the printer for service or transport to a remote
location. This feature pumps most of the ink back into the Ink Tanks and then releases (opens) the
Printhead Latch. See Appendix
Cartridge" or "Replacing Printhead
"Preparing the Printer for
OPERATING THE PRINTER
Cartridge" for more details
Transport" for more details.
SECTION 3
37