Rena MACH 5 Operator's Manual page 22

SECTION 2
INSTALLING THE PRINTER
9. When the "Finished software installation" window opens; uncheck the "Print Test Page" box.
Since the printer still requires the installation of the ink tanks and the printhead cartridge; you do
not want to print a test page at this time.
Select if you want to set the printer as default or not.
If the button displayed at the bottom of the window shows "Finish". Then click Finish>.
If the buttons displayed show "No Reboot" and "Reboot"; then make sure all other programs have
been closed and click Reboot>.
The "M Series Driver" should now be available in your "Printer and Faxes" or "Devices and Printers"
folder.
Tip: After you have completed printer setup (service station
installed, ink tanks installed, printhead cartridge installed,
media feed setup); it is a good idea to print a test page from
the printer driver to confirm that the printer driver and printer
are communicating. This is done by right-clicking on the "M
Series Driver" and selecting "Properties" (Printer properties
in Win7). Then click on the "Print Test Page" button.
18