Mobotix Q25M Manual page 63

Preparing the Installation
Non-Square Rooms
When viewing a 360° (full) image in the browser, you will notice that the top and bottom
of the image is not fully visible, i.e. some image information has been clipped. This is not
a fault of the camera, but intended behavior that aims at achieving the best possible uti-
lization of the image sensor by the camera software. Bearing this in mind, it is advisable
to install the Q25M in rectangular room ceilings so that the arrow marked OBEN / TOP
points towards one of the longer walls of the room as shown in the figure.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
63
/156
Original full image
from the Q25M (ceil-
ing installation in a
rectangular room)