Mobotix Q25M Manual page 64

64
/156
Never mount the cam-
era to metal surfaces
(condensation may
damage the camera):
MOBOTIX recommends
using an On-Wall Mount
or the Wall Mount
For the installation
on building corners,
the Corner and Pole
Mount and a Wall
Mount will be needed
Q25M Camera Manual: Installation
Lowered Mounting or Mounting on Extensions
When mounting the camera in rooms with a
high ceiling , or outdoors, it may be advisable
to mount the camera in a lower position. This
reduces the distance between the camera and
the objects that are to be monitored, which in
turn increases the recognizability of details.
One practical solution would be to install the
camera on a base plate attached to a suitable
extension (metal tube) hanging from the ceil-
ing. The network cable can be hidden from
view by running through the interior of the tube.
Similar to lowered mounting from the ceiling,
you can also attach the camera to an extension
mounted to a wall to better use the 360° image
of the camera (e.g. outside, above a portal).
Such an installation would use the pole mount
accessory (MX-D22-OPT-MH) in conjunction
with the wall mount (MX-D22-OPT-WH) as a
sturdy base for the camera, which is then
mounted to the extension pole.
MOBOTIX does not recommend attaching the
camera directly to metal carriers, especially
when mounting the camera outdoors or when
the ambient temperature varies greatly. As
an additional measure to protect the camera
against condensation, you should use either
the On-Wall set (MX-D22-OPT-AP) or the Wall
Mount (MX-D22-OPT-WH).
Installation on Building Corners with the
Corner and Pole Mount
This is a special method of Q25M installation,
offering substantial advantages for the outdoor
surveillance of buildings.
The hemispherical lens of a single Q25M can
cover the entire 270° range from one building
wall to the other, for an "around the corner"
view!
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com