Table of Contents
Advertisement
Virtual PTZ and Full Image Recording
To permanently save the standard image setting defined for the Q25M, go to the
Store Complete Configuration option in the Manage Settings Quick Control. The
settings will then remain in effect, even after rebooting.
Functions Of The Q25M OnScreen Control
Close
Pan to the left
Default setting
To use the OnScreen Control, click on the arrows in the top area for shifting the image
section. In the bottom areas, which are displayed when needed, click to the left and/or
right of the center point.
The same applies for every area: The further away that you click from an area's center
point, the greater the change triggered. To reset an area, click on its center point again.
During panorama correction, clicking between the two trapezoid symbols straightens the
left or right tilting lines, which are best visible at the edges of the image section.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Caution
Tilt up
Pan to the right
Tilt down
Zoom
Panorama correction
Image tilt correction
135
/156
Depending on the mount-
ing position (ceiling,
wall, floor), panorama
correction and mount-
ing error correction
may not be available!
Bring columns together
at the
top
(neces-
sary to correct the
example on the left)
Bring columns together
at the
bottom
Hide quick links:
Advertisement
Table of Contents
