Mobotix Q25M Manual page 79

Mounting the Camera with the On-Wall Set
Drilling Template On-Wall Set
ø 160 mm/6.3 in
Use the fold-out template included at the end of the printed manual (valid for both
0° and 10° On-Wall Sets).
Make sure that the drilling template is not scaled or adjusted to the paper size when
printing the PDF file (enlarged or reduced).
The maximum torque for all screws is 1 to 1.2 Nm.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
ø 166 mm/6.54 in
Notes
79
/156
Find the drilling
templates (scale 1:1)
at the end of the
manual as a fold-out