First Images And Network Parameter Configuration In Mxcontrolcenter - Mobotix Q25M Manual

118
/156
Download
MxControlCenter
for free from
www.mobotix.com
Q25M Camera Manual: Operating the Camera

3.2.3 First Images and Network Parameter Configuration in MxControlCenter

Installation
Download the setup file from the MOBOTIX website to install the latest version. The latest
versions are available at www.mobotix.com in the Support > Software Downloads >
MxControlCenter section.
To install MxControlCenter, simply double-click on the setup file and follow the instructions.
The selected files are copied to the computer (older versions will be removed automati-
cally) and the designated shortcuts are created during the installation process (Desktop,
Start Menu, etc.).
Caution
MxControlCenter will automatically attempt to find all MOBOTIX cameras in the
physically-connected network (that is, even a MOBOTIX camera with a factory IP
address of 10.x.x.x ). Make sure that the firewall settings on your computer are
low enough so that MxControlCenter is not blocked. If any MOBOTIX cameras are
found, MxControlCenter can automatically reconfigure them so that they are avail-
able in the current subnet of the computer. If you do not have permission to modify
these settings on your computer, contact your system administrator for assistance.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com