Power Supply When Connected Directly To A Computer; Power Supply With Power-Over-Ethernet Products - Mobotix Q25M Manual

Network And Power Connection

2.9.4 Power Supply When Connected Directly to a Computer

1. Connect the factory pre-installed cable of the camera to the camera connector of
the PoE adapter.
2. Connect the PC/Power connector of the PoE adapter to the Ethernet port of the
computer.
3. Plug the RJ45 connector of the power supply unit into the LAN/Power connector
of the PoE adapter.
Power supply

2.9.5 Power Supply with Power-Over-Ethernet Products

Connect the factory pre-installed cable of the camera to the Ethernet connector of the PoE
switch/router. The switch/router must support the PoE standards IEEE 802.3af or IEEE 802.3at.
LAN/www
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
PoE adapter
Camera
RJ45
Camera
(10.8.0.99)
PoE/PoE+ switch/
router
Camera
(10.8.0.99)
105
IP addresses in the
diagram are shown
only as an example
PC
(10.8.0.11/255.0.0.0)
IP addresses in the
diagram are shown
only as an example
PC
(10.8.0.11/255.0.0.0)
/156